Harrington & Richardson 1871 Help Center Retail Locator Site Map
About H & R Firearms Firearms Customer Support News Dealer Locator Marlin Firearms
RifleCustomer Support

Barrel Accessory Program

To obtain your service request number, or To obtain your service request number, or if you have any questions about the barrel accessory program or need to obtain the age of your firearm, or availability please have your firearm serial number ready and please call 1-866-776-9292 prior to shipping your firearm. Prices and barrel selection subject to change without notice. There is a $25.00 per barrel fitting fee and $19.00 shipping fee for the first two barrels fitted and $10.00 for each additional two barrels.

Important Information, PLEASE READ before continuing.

  • Additional barrels may be added to firearms of our manufacture since 1987 only, with a serial number that begins with N, H or C. We do not install additional barrels on any other manufacture's firearms.
  • Additional barrels will be fitted to the proper frame if the frame passes a detailed inspection. This inspection is performed by the repairman at the time the frame is received
  • Rifle barrels may be added to firearms manufactured since 2000 and only to frames (SB-2) that originated as a rifle, if frame passes inspection.
  • Rifle frames (SB-2) newer than 2000 may be fitted with additional rifle, shotgun, and muzzleloader barrels, if frame passes inspection.
  • All shotgun frames (SB-1) 1987 and newer and rifle frames (SB-2) produced between 1987 and 1999 or 1999 and newer may be fitted with additional shotgun and muzzleloader barrels only, if frame passes inspection.
  • Muzzleloader frames can only be re-fitted with muzzleloader barrels only.
  • Rimfire frames (SS-1) can only be fitted with rimfire calibers.
  • 10 gauge shotguns and the 12 gauge Ultra Slug Hunter with the heavy rifled barrel can only be fitted with other 10 gauge or 12 gauge Ultra Slug Hunter barrels only.
  • We do not sell additional barrels outright. All barrels must be factory fitted.
  • We do not sell barrel blanks or do custom calibers/barrel lengths/finishes/sights.
  • Additional barrels are available as additional barrels only. We will not exchange barrels for existing barrels on shotguns and rifles, as it will change the model.
  • In order to obtain an additional barrel(s), the stock, forend and frame (receiver) must be sent to us so that they may be properly hand-fitted to the barrel, to be sure they are correctly head-spaced and proof-tested.
  • Hammer Spurs are Sold Separately from Barrel

 

To identify the difference between an SB1 frame and an SB2 frame:

SB1 frames will originally have a shotgun barrel, .357 Mag or .44 Mag barrel and when you remove the stock from the frame there will be a single hole for the stock bolt and the back side of the receiver will be solid.

SB2 frames will have originally had a rifle caliber barrel and when you remove the stock from the frame there will be the hole for the stock bolt and there will also be "cut outs" at the top and bottom of frame.

Please refer to the following picture for reference:

To obtain an additional barrel(s), please take the following steps:

Please contact the H&R Repairs department at 866-776-9292 for your service request number.
Open the firearm by pressing the release lever, and be sure the chamber is empty.
Remove the forend screw and forend.
With firearm fully open, lift the barrel off the hinge.
Carefully package the stock, forend and frame (receiver) for shipping. (DO NOT SHIP YOUR EXISTING BARREL.) Send by U.S. Mail or U.P.S. insured to the following address (DO NOT MARK THE NATURE OF THE CONTENTS ON THE OUTSIDE OF SHIPPING CARTON):

H&R 1871, LLC
ATTN: Barrel Accessory Offer
14 Hoefler Ave
Ilion, NY 13357

Mark your return authorization number on the outside of the box (i.e. SR0000xxxx)

Please include a copy of the service request form or copy of the order form including the serial number of your firearm, your name, physical address (no P.O. Boxes accepted) and your daytime telephone number.

Keep a record of the serial number, service request and order forms of the returned firearm for your records.

All prices are in U.S. funds and are subject to change without notice.

Due to licensing requirements, this offer is only available to U.S. residents.

During periods of high demand, please allow six to eight weeks for delivery of your additional barrels or accessories if the parts are in stock. Installation time may vary depending upon service demands. Backorder times will vary.

Shotgun Barrels

These barrels will fit most SB-1 and SB-2 frames newer than 1987. Refer to “Important Information” above to see if your firearm frame will qualify. All barrels are blue finish only. All barrels are 3” chamber, smooth-bore and bead sight barrels unless otherwise noted. The choke designation and length will be noted per barrel listing. Any special characteristics will be noted. For screw-in choke models the choke tube is sold separately.

Description

Part Number

Price

12 Ga 22” Mod

F150

$59.74

12 Ga 28” Full

FB010

$59.74

12 Ga 28” Mod

FB011

$59.74

12 Ga 24” Full, 3 ½” chamber

FT10

$59.74

12 Ga 32” Full

F932

$81.37

12 Ga 24” Fully Rifled, Rifled Sights

FB014

$81.37

12 Ga 24” 3 ½” Chamber, Screw-in Choke Tube (Sold Separately)

FT98

$81.37

12 Ga 28” 3 ½” Chamber, Screw-in Choke Tube (Sold Separately)

FG98

$81.37

20 Ga 22” Mod

F250

$59.74

20 Ga 26” Full, 3” chamber

FB020

$59.74

20 Ga 26” Mod, 3” chamber

FB021

$59.74

20 Ga 24” Fully-Rifled, Rifle Sights

FB024

$81.37

20 Ga 24” Fully-Rifled, Scope Rail and special forend required for this model included.

F920

$123.60

28 Ga 22” Mod

F888

$59.74

28 Ga 26” Mod

FB028

$59.74

.410 Bore 22” Full

F450

$59.74

.410 Bore 26” Full

FB041

$59.74

.410/45 Colt 20” Mod

F41C

$104.03

 

Click for an order form

back to top

Choke Tubes

Choke tubes listed below are for the 12 ga. and 20 ga. shotgun barrels listed above that require the Screw-in Choke tubes. These also fit the Pardner Pump models.

 

Style

Steel Shot?

Part Number

Price

12 ga – Improved Cylinder

Flush

Yes

FS12IIC

$28.84

12  ga - Modified

Flush

No

FH12MOD

$28.84

12 ga – Improved Modified

Flush

Yes

FS12IIM

$28.84

12 ga – Full

Flush

No

FH12IFL

$28.84

12 ga – Extra-Full

Extended

No

FH12EXF

$35.02

12 ga – Turkey

Extended

No

FH12ETY

$35.02

20 ga – Improved Cylinder

Flush

Yes

FS20IIC

$28.84

20  ga - Modified

Flush

No

FH20MOD

$28.84

20 ga – Improved Modified

Flush

Yes

FS20IIM

$28.84

20 ga – Full

Flush

No

FH20IFL

$28.84

20 ga – Extra-Full

Extended

No

FH20EXF

$35.02

20 ga – Turkey

Extended

No

FH20ETY

$35.02

 

Click for an order form

back to top

10 Gauge Barrels

10 gauge shotguns and the 12 gauge Ultra Slug Hunter with the heavy rifled barrel newer than 1987 can be fitted with other 10 gauge or 12 gauge Ultra Slug Hunter barrels only. All barrels are blue finish, bead sights unless otherwise noted. The choke designation and length will be noted per barrel listing. Any special characteristics will be noted. For screw-in choke models the choke tube is sold separately.

Description

Part Number

Price

10 Ga 28” 3 ½” Chamber, Full Choke

F924

$59.74

10 Ga 24” 3 ½” Chamber, Screw-in Choke

F973

$92.70

12 Ga 24” 3” Chamber Ultra Slug Hunter barrel, Fully-Rifled, Heavy- wall, scope rail included

F377

$104.03

Click for an order form

back to top

Rifle Barrels

These barrels can be fitted to most SB-2 frames 2000 or newer. Refer to “Important Information” above to see if your firearm frame will qualify. All barrels are blue finish unless otherwise noted. The type of sights (either open adjustable sights or scope rail), barrel length or special features will be noted per barrel listing.

Description

Type of Sights

Part Number

Price

22 Hornet 22”

Open Sights & Drilled and Tapped for Scope Rail (not included)

F224

$104.03

223 Rem 20”

Open Sights & Drilled and Tapped for Scope Rail (not included)

FSY3

$104.03

223 Rem 22”

Scope Rail

F223

$104.03

223 Rem 22” Stainless

Scope Rail

F223S

$123.60

223 Rem 24” Bull

Scope Rail

F823

$123.60

22-250 22”

Scope Rail

FR03133

$104.03

22-250 22” Stainless

Scope Rail

FR03174

$142.14

243 Win 22”

Scope Rail

F243

$104.03

243 Win 24” Bull

Scope Rail

FR843

$123.60

25-06 26”

Scope Rail

F806

$123.60

270 Win 22”

Scope Rail

F270

$104.03

280 Rem 26”

Scope Rail

F280

$123.60

7mm-08 Rem 22”

Scope Rail

F707

$104.03

30-30 Win 22”

Open Sights & Drilled and Tapped for Scope Rail (not included)

F231

$104.03

30-06 Sprg 22”

Scope Rail

F306

$104.03

30-06 Sprg 22” Stainless

Scope Rail

F306S

$142.14

308 Win 22”

Scope Rail

F308

$104.03

308 Win 22” Bull

Scope Rail

F808

$123.60

35 Whelen 22” – Limited Quantity

Scope Rail

FR03702

$104.03

35 Whelen 22” – Limited Quantity

Open Sights & Drilled and Tapped for Scope Rail (not included)

F404326

$104.03

357 Mag 22” can be installed on SB-1 Frames

Scope Rail

F357

$104.03

44 Mag 22” can be installed on SB-1 Frames

Scope Rail

F44M

$104.03

45-70 Govt 22”

Open Sights & Drilled and Tapped for Scope Rail (not included)

F457

$104.03

45-70 Govt 32” Dovetailed for front sight, drilled and tapped for rear sight, sights not included.

Dovetailed & Drilled/Tapped

FW45

$123.60

444 Marlin 22”

Scope Rail

F444

$104.03

500 S&W

Open Sights & Drilled and Tapped for Scope Rail (not included)

F440

$104.03

 

Click for an order form

back to top

Muzzleloader Barrels

Muzzleloader barrels can be fit to any SB-1, SB-2 or re-fit to an existing muzzleloader frame newer than 1987. Muzzleloader barrel fitting includes Williams Fire sights, ramrod, forearm (synthetic only; wood forearm are currently not available), breech plug wrench and five primer carriers. Muzzleloaders are a 1:28” twist rate.

Description

Part Number

Price

50 Cal 26”

F50M

$145.00

Click for an order form

back to top

Rimfire Barrels


Rimfire caliber can be fitted to the SS1 rimfire frames newer than 1987 only. No other frames will accept rimfire calibers due to the location of the firing pin. All barrels are blue finish.

Description

Type of Sights

Part Number

Price

22 WMR 22” BULL

Scope Rail

F22MB

$81.37

22 WMR 20”

Drilled and Tapped for Scope Rail (not included)

F22M

$81.37

22 LR 20”

Open Sights & Drilled and Tapped for Scope Rail (not included)

F22L

$81.37

17HMR

Scope Rail

F17HMR

$81.37

Click for an order form

back to top